MV7 MV7X MV7+ Boom Arm – Mic Arm with Foam Cover Windscreen Compatible with Shure MV7 and Shure MV7X and Shure MV7+ Microphone with Pop Filter and 2 Cable sleeves by YOUSHARES
$23.96
Price: $23.96
(as of Feb 09, 2026 23:26:31 UTC – Details)
As a video streamer creator, do you wish to hold your MV7/MV7X/MV7+ mic in any position you desire? Want it reaches to your mouth easily?
YOUSAHRES’s suspension boom scissor arm stand with foam windscreen is your best choice.
The Professional microphone stand comes with MV7 foam windscreen. No more PLOSIVES!
Not only smoothly position the microphone wherever you desire, but also improve the audio quality of noise cancellation easily.
Mic stand is built with firm metal, double-braced arms and strong spring, and can be used for different conditions. 180° foldable arm can be adjustable in full angle.
The boom arm has knobs on two of the hinges you can tighten to make it stay in one place.
It is easy to install. Takes less than five minutes.
MV7 Foam pop filter cover is high density, filters noise to the lowest.
Package included
1 X NB-35 Mic Boom Arm Stand Set
1 X MV7 Foam Pop Filter
Frequently Asked Questions:
Q: Does this combo come with a MV7 Mic?
A: Sorry, it doesn’t, our combo just has a mic stand, foam windscreen.
Any concerns? Just post your question to the Q&A part on this page. We are pleased to answer every question for you anytime.
Perfect Effect – Suspension boom arm holds your shure MV7 / MV7X / MV7+ mic in any position you want. No sag, just rock solid. It can be a good replacement for shure mv7x xlr and shure mv7+ boom arm.
Professional Windscreen – Compatible with shure MV7 / shure MV7X / shure MV7+ microphones, Foam cover reduces wind and background noise.
Mic Stand – Dual suspension springs of each boom arm protect microphone from shaking, suddenly dropping. It’s sturdy steel construction, easy to setup and Folding.
Easy to Mount – It is so easy to setup, takes less than five minutes and get more convenient to use your micphone.
All-in-one Combo – Package 1 x shure MV7 / shure MV7X / shure MV7+ boom arm, 1 x Desk clamp, 1 x 3/8″ to 5/8″ Adapter, 1 x Foam cover, 2 x Cable sleeves . Note: MV7 / MV7X / MV7+ Microphone Not Included.
13 reviews for MV7 MV7X MV7+ Boom Arm – Mic Arm with Foam Cover Windscreen Compatible with Shure MV7 and Shure MV7X and Shure MV7+ Microphone with Pop Filter and 2 Cable sleeves by YOUSHARES
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
ARTIX CL750 Over Ear Headphones Wired with Mic & Volume Control, Audio with 100% Noise Cancelling Computer Wired, Plug in for Laptop, Dj Corded Studio Headphones
DEWALT Heavy Duty Magnetic Bluetooth Neckband Headphones, Wireless Around the Neck Earbuds w/30H Runtime+Noise Isolation, HandsFree Magnetic Wireless Earphones w/Mic Bluetooth Headsets – Black Edition
JBL Tune 720BT – Wireless Over-Ear Headphones with JBL Pure Bass Sound, Bluetooth 5.3, Up to 76H Battery Life and Speed Charge, Lightweight, Comfortable and Foldable Design (Black)
Soren Kierkegaard –
Used almost daily, super sturdy, practical
The mic arm stays exactly where I put it. My Shure mic is fairly heavy, so I worried at first that it was going to drag it down, but for 99.99% of all the orientations I actually need to use the mic in, it stays put. You have to put the mic in some impossible position you’d never actually use in order to witness any droop.
Wally 48 –
The Best “Plosion” Screen For Shure MV7+ Microphone
Absolutely perfect “plosion” screen for the Shure MV7+ microphone. I bought a SM7b wind sock at the same time, for comparison (the stock pop filter on the Shure MV7+ is absolutely worthless at stopping plosions). The SM7b wind sock performed great at removing plosions, but it also muffled a lot of the natural voice. This metal w/foam inner pop filter removes the plosions (whether or not you keep the stock MV7+ pop filter on/off) without any noticeable loss to the natural sound of the voice. I can’t recommend this enough, I’d say go with this or try out the standard SM7b pop filter if you’re not a fan of gooseneck pop filters (the “not” wind sock version, i haven’t tested it out myself but I hear it works well). The clamp attaches easily to the neck of the MV7+ mic, super easy to put on/take down, and has rubber pads on the clamp to prevent scratching the surface.
KJamsI –
Killer product with a short neck
I agree with many of the other reviews here. Really nice build quality and ideal plosive rejection. you can blow directly into it and feel NO air on the other side, but high frequency reduction is negligible if any. The smaller size is awesome, it’s got a great look with bottle-style and top-address mics generally, where the standard 6″ filters look oversized.The gooseneck is too short for many applications, however and I generally have to put it on a second stand or rig up some kind of weird system of extensions to get it in place. Put a longer, stiffer gooseneck on it and this is a world-beater product.
Mogo –
Great quality and very good price point
Well constructed, all metal and flexible to mold to your position. The screen secures very nicely to your mic stand
t scott h –
Pop Screen works perfect
Perfect for our mic stand
Hollowquest –
Buyer Beware
On both the male and female side, the thread distance was not standardized. Yes, its 5/8.. but the threads were off enough to cause lock up when tighten. This resulted in me having to take pliers to get it off, and in the process mangle the thing. I was using standard 5/8 mic mount and a standard 5/8 mic, both sides did NOT twist easy.. and I’m certain it wasn’t me putting it on crooked. Trust me.. I tried 20 times to tighten without force, fearing this exact thing. It was the threads. They were not fit to meet the standard 5/8 threading.
Carlos –
Exelente
Excelente calidad de producto masiso y compacto el soporte ideal para tu micrófono profesional
KristofferCarter –
Great product, ruined by Junk Stickers
An otherwise awesome product— clean, well designed, and convenient. But why oh WHY would they ruin it with two useless stickers that are nearly impossible to get off without a ton of effort? Deducting 1 star for each sticker. Non adhesive would be ideal, if they needed to be on there at all.
Danilo Solorzano –
RÃgido fuerte y no daña la mesa como otros, se agarra bien y practico de usar, esconde bien el cable.
Roberto López –
Todo muy bien pero el recubrimiento que tiene para “embonar” se le safa, no afecta tanto porque aún asi se puede usar pero se le cayó rápido
Daniel A. –
sirve para lo que es , ayuda con su función y me gusta el tamaño que no es tan aparatosa como otras. también es resistente, se queda en su lugar no como otros.
RICARDO PINEDA TIRADO –
No es estable, se baja y hay que estarlo subiendo
Malo –
Muy bueno se nota la diferencia en el audio