60W 4-Port Gigabit PoE Switch/Extender PoE Splitter Repeater, 10/100/1000Mbps, Supports IEEE 802.3af/at for Ethernet Extension, 6KV Lightning Protection, by CENTROPOWER
$51.99
Price: $51.99
(as of Feb 09, 2026 01:24:43 UTC – Details)
Product description



60W 4 Ports Gigabit Poe Extender
PoE in connection PoE Swith, 12.36 or 45.78 powered support, support IEEE802.3af & at the power supply, PoE out for the supply terminal 4 Gigabit, PoE total power can reach 60w [PoE Switch or PoE Injector need to provide IEEE802.3at 4Pairs(60W) power].

CAT5/CAT6 POE Input
Ethernet and PoE connections both restrict cable distances to 100 meters between network ports. To overcome this distance limit, network installers can simply connect an PoE Extender in-line with the Cat-5e or Cat-6 calbe.

POE output 4 ports
With Gigabt PoE Extender, PDs (such as IP Security Cameras,VoIP telephones, wireless access points) can be installed at greater distances than 100 meters from one another. By connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to 200 meters, depending on PDs power required and power source

Wall-Mountable design
Wall-Mountable design
Easy plug-and-play installation
EMI standards complies with FCC, CE class B

4 ports poe extender

POE input

POE output

Wall-Mountable design

Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars 505
4.0 out of 5 stars 505
4.0 out of 5 stars 505
3.7 out of 5 stars 37
3.4 out of 5 stars 9
Price
$17.89$17.89 $48.99$48.99 $51.99$51.99
— no data
$76.95$76.95
POE port
1 port 1 in 2 out port 1 in 4 out port Waterproof 1 port Waterproof 1 in 2 out port
802.3af / PoE
✓
✓
✓
✓
✓
802.3at / PoE+
– no data
✓
✓
✓
✓
Ethernet port
10/100 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps
Output voltages DC48-57V
✓
✓
✓
✓
✓
Indoor or outdoor
indoor indoor indoor indoor/outdoor indoor/outdoor
Connectors Shielded RJ45
✓
✓
✓
✓
✓
Extension distance 100 meters
✓
✓
✓
✓
✓
Enhance Your Network: Compatible with IEEE802.3af/IEEE802.3at/IEEE802.3at 4Pairs, our PoE extender enables you to extend the range of PoE and Ethernet up to 100 meters without additional power supply, greatly enhancing your network reach
Intelligent Protection: Designed to automatically detect and protect your PoE equipment from damage caused by incorrect installation, ensuring reliable performance every time
Seamless Performance: Our PoE extender offers full-rate network performance throughout the entire extended distance, eliminating latency, and packet loss
Space-Saving Design: Featuring a wall-mountable design, our PoE extender is perfect for those with limited space, and it’s easy plug-and-play installation means you can get started in no time
Compliance Matters: Meeting EMI standards which comply with FCC and CE class B, you can be sure that our PoE extender is made to the highest industry standards
Built to Last: Our PoE extender comes equipped with built-in 6KV lightning protection, ensuring your equipment stays safe and operational even in the event of a sudden power surge or lightning strike
9 reviews for 60W 4-Port Gigabit PoE Switch/Extender PoE Splitter Repeater, 10/100/1000Mbps, Supports IEEE 802.3af/at for Ethernet Extension, 6KV Lightning Protection, by CENTROPOWER
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.








Aaron –
Does the job
I bought this because the world has gone crazy and I’m in the process of making my own home more secure. That means an array of ip cameras and a lot of network cable pulling! I drilled a hole in the wall and began feeding cable through that hole and quickly realized the hole just isn’t big enough. Since I want to avoid crowding in the hole, I started to look for solutions and ran ran across this guy. I needed a solution that would power two PoE IP cameras using one cable without a plug nearby and this fit the bill. Since its for outside use, I paired it with this itemhttps://www.amazon.com/gp/product/B075DHRJHZ/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1and a bit of silicone to ensure water tight and all has been well (note: its pretty tight with all cabling in the box – I would buy bigger if I could do over). It’s been up for a couple months now and survived the elements thus far. We’ve had a few hot days here (80+ ) since the install and I’ll post back here after winter for an update on how it went over the winter months but for now, 5 stars!Update 04/2022Still going strong powering two poe cameras after two winters and going on the 2nd summer in the lower Midwest. Would still highly recommend this product.Update 05/2023Set it and forget it. I have not touched this setup since installation. Works good in the weather proof box out in the elements. For reference, this year my area experienced a very cold few days, cold enough to freeze equipment on the warehouse floor at work making them inoperable. This guy kept trucking, no issues.
HenryH –
Perfect to solve situations w/ 802.3af (like Reolink)
Purchased a Ubiquiti NanoSwitch to power a Reolink camera and Ubiquiti Access Point (AP) off of one single Ubiquiti PoE switch port. That doesn’t work: NanoSwitch only runs on (and provides) passive 24V PoE — while Reolink cameras only take active 802.3af PoE.This product does what one would think NanoSwitch does: it takes 802.3af (48V) in from a Ubiquiti PoE switch — one provides 802.3af compliant (48V) PoE output to two devices — all without any external power.I did have one problem: my Reolink camera won’t boot if it is plugged into Port 2. It only works if plugged into Port 1. I suspect this is because of the timing of how fast the AP gets its power, and how much power it draws on boot up. But whatever, it works perfectly, it’s cheap, it’s 802.3af compliant. A lifesaver.
CyberNet Solutions –
Worked on arrival, plug and play – but only lasted one year. Spend more, get something better
Worked for just one year.Failed at just over 12 months; POE switch detects a POE device but link never negotiates.If you are installing this for a client, keep your reputation, spend more and get something worthwhile.In the future we will skip these cheap units and use Veracity; substantially more costly but has always been reliable.
Alex –
Works perfectly, trivial to set up.
Great product. Allowed me to easily wire up low power lights and security cameras all over my house from my router thats on a UPS, so now when my power goes out, all my security cameras still work. And if it is early in the morning or late at night, my emergency lights go on automatically. Obviously a lot more pieces went into the setup, but there were many options for all other components, while this was the only 60w poe extender with 4 outputs and which does not require an external power source that i could find. Highly recomend this for anyone setting more than 1 device in 1 place on their PoE network.
Mark frith –
great deal
works great
Peter Kinney –
Works
The problem I have is the cat 5 cable run is over 330 feet and I was losing signal. By using a booster, splitter and a power injector I was able to get a good signal at the end for wifi use. There are some pauses on Netflix every now and then and some websites take a bit to load but over working fine after three months.
David C. Harris –
Allows two cameras at one location without pulling an additional line
I had a bullet camera mounted under the eve of my summer house and found a PTZ dome camera I wanted at that location, but I wanted to ensure I kept the existing, fixed view also. I found this POE switch and thought it must be too good to be true. I got a small (about 6″x6″x5″) plastic mounting box to put under the eve, mounted both cameras on it, and mounted the POE switch inside. I was using a Netgear GS305EP to provide the POE feed to that location, and this combination is working great. The system has been working for four months (July to October in Maine) with no problems. Its night, but I captured a still to show the PTZ dome mounted to the bottom and the bullet mounted off to one side. This was a very easy solution and I really appreciate the ease of mounting the box (also made it easier to mount both cameras) rather than pulling a new POE data line.
Devon B –
50/50 shot of these working for more than a month
I’ve ordered about 20 of these in the last year for camera systems, half of them from this specific seller. About the same amount the year before. They are all low quality, no matter who’s selling them, and my experience has been about a 50% failure rate within the first month or so.It doesn’t matter if they are installed indoors or outdoors in a weatherproof box, it’s still a toss up if you’ll be replacing them again soon.The problem I have, is that I haven’t found a better alternative. Higher quality products I’ve tried haven’t had much better replacement rates, they just have better exteriors and cost more to replace.
lavamind –
Worked well from the start. I’ve had this device for 18 months, zero issues.