StarTech.com 2-Post 12U Heavy-Duty Wall Mount Network Rack, 19″ Open Frame Server Rack with Adjustable Depth, Wall Mount Data Rack for IT / AV / Patch Panel / Computer Equipment (RK12WALLOA)

I’ll never order another cabinet or rack…
This thing is a tank! At first I was disappointed it doesn’t have any vertical rails in the rear, but if assembled properly, you really don’t need them. Assembly isn’t difficult, but it took longer than I’d have expected. Fortunately, I got the exact depth needed.I do low-voltage work on the side, something I’ve done for more than a decade. I’ve installed dozens of different wall-mount cabinets and racks, from 2U racks up to 26U cabinets. This was far easier to assemble and more logical than most. It gives depth flexibility, everything you really need comes in the bags. I had enough capture nuts and hardware to mount my equipment and shelves.This is probably more than what your average person needs, but it fits my QNAP NAS, Unifi switches and UCK, patch panel, CCTV DVR, and Fortigate nicely. Initially I thought I would’ve liked something height-adjustable, but this was the perfect height for me. Very sturdy. Very heavy. Very well-finished. Exceptional bang for the buck. Highly recommend this product!

Solid, reasonable cost network rack
Needed additional space in network rack – selected the 8U depth adjustable rack. This thing is solidly built, very sturdy and easily adjusts the dept to allow for a variety of most common devices. The open top, sides and bottom allow for easy cable management, access and fan-less ventilation.My rack arrives pre-assembled, with only needing to remove the 16 bolts to extend the depth and inset the cage nuts.Only considerations / slight cons: My rack did not have markings for the U positions as others have shown. Not an issue as just did quick marks with marker to ease installation. The cage nuts that came with it were not the best and had several occasions of the cage nut popping out while installing component. Also didn’t notice cage nuts and bolts are M5 rather than M6 (which is a bit more common) until was missing 3 bolts and attempted to use cage bolts I already had, after lots of cussing discovered my old rack used all M6 cage nuts and bolts. But minor considerations for a very reasonably priced and sturdy wall mount rack.Be sure use solid 1/4″ lag crews (not included) into studs, or if stud alignment is off (like mine was) a good piece of plywood backer which is attached to the studs.

Excellent build quality
This rack is kind of expensive, but it’s beefy. Assembly instructions were clear, and provided hardware was both copious and high quality. The Phillips heads did not instantly strip; they deformed slightly, but I was using a phillips one size too small, so that’s on me.My only gripe is that the instructions have good dimensions for nearly everything, except the vertical mounting hole locations (i suspect they use the same instructions for all heights, and that dimension is the only one that would change). I think I measured my mounting holes a little wide, which led to my rack being mounted slightly splayed. Only enough to notice if you look for it

これくらいコンパクトなものでももう事足りますね。

This rack was perfect for upgrading a network install which had been crammed into a cupboard far too shallow to take a decent sized cabinet. This rack wastes zero space and having the sides open means easy access; I was afraid it might be a bit wobbly given the lack of bracing but needn’t have worried as this is a very sturdy (and very well finished) rack indeed.No sharp edges anywhere; easy to assemble; decent sized holes for wall mounting; adjustable to the precise depth required – very impressed.

問題なく使えています